Tube Finning Machine

We believe in mutual relationship between us and our clients, as we offer quality and earn satisfaction from the customers' end. We here manufacture and supply Tube Finning Machine adorned with versatility, speed, durability and efficiency you require at the user end. The high end machinery is used to increase heat precipitation efficiency by 5 to 6 times and are also capable of continuous finning. These machines are used to make cooler, thermal fluid heat exchanger and are fabricated from metals like MS, copper, SS & aluminum.

Our clients can avail from us an extensive array of Finned Tubes with a continuous Spiral/'L' Wound Finned Tubes having crimp/'L' fins, which increases the overall heat transfer surface area. a high rate of quicker dissipation and higher heat-transfer coefficient is obtained with the equipments fitted with Fin Tubes. These are paired with continuous spirally crimped/'L' and are made under high mechanical tension bonding process, in which fin material is bound over the tube to get maximum contact of tube & fin and only end of fins are brazed/welded to core tube.

These are used for heat transfer i.e. cooling / heating of :

• Oils
• Fluids
• Water
• Steam
• Air Gases
• Other Vapours

Application Areas :
These tubes are used in Fin Heat Exchangers, Steam Radiators, Autoclaves, Condensers, Dryers, Ovens, Furnaces, Air Heaters, Oil Coolers, After Coolers, and Air Compressors & in many other Heat Transfer Equipments. Fin Tubes are widely used by chemical, Petrochemical, Fertilizer, Food, and Pharmaceutical, Paper, Textile & several other industries.

Construction :

• Base - M.S. Fabricated with foundation provision and leveling arrangement.
• Body - Capsule type Roto advancing arrangement of Tube for continuous Tube Finning and mandrel arrangement for manufacturing of Fin Coil. Adjusting for pitch 2.0mm to 12.0mm.
• Drive - Geared Motor with variable frequency drive to change speed for various sizes of Tubes.

Capacity :

• PTF- 40 (Spiral Type) :
  
  • Suitable for Tube OD 8.0mm to 40mm
  • Fin Height 5mm to 20mm, Fin Thickness upto 1.0 mm

• PTF-100 (Spiral Type) :
  
  • Suitable for Tube OD 20mm to 100mm.
  • Fin Height 5mm to 40mm, Fin Thickness upto 1.0mm

• PTF 40 (‘L’ Type) :
  
  • Suitable for Tube OD 8.0 mm to 40 mm
  • Fin Height 10mm (If fin height is other than 10mm machine will be designed accordingly to the requirement), Fin Thickness upto 0.6 mm

• PTF 100(‘L’ Type) :
  
  • Suitable for Tube OD 30 mm to 100 mm
  • Fin Height 20 mm (If fin height is other than 20mm machine will be designed accordingly to the requirement), Fin Thickness upto 0.6 mm.

Power :

• PTF-40 (Spiral) - 3.0 HP Geared Motor with V.F.D.
• PTF-100 (Spiral) - 5 HP Geared Motor with V.F.D.
• PTF-40 (’L’ Type) - 3.0 HP Geared Motor with V.F.D.
• PTF-100 (’L’ Type) - 7.5 HP Geared Motor with V.F.D.